You are here: Home» Products » BGA rework station

BGA rework station T862++

OnLine Service:

E-mail Us PDF Download
【Prev Products】 【Next Products】

Description

Features


1. Use of infrared welding technology which is developed independently.

2. Use of an infrared heat lamp. Heat is easy to pierce and distribute evenly, which overcome disadvantage (burn out elements) of traditional welding machines.
3. Easy operation. You just need one-day training and you can operate it skillfully.

4. No need for unsolder tools. IRDA Welder T862++ can unsolder all the elements between 15 and 35mm.

5. This machine has 600W hot-melt system. Its preheating area is 120x120mm.

6. Infrared heating without heated air flowing. No impact on circumjacent small elements. It is suitable for all of the elements, especially Micro BGA elements.

7. Processor controlled setpoint regulated temperatures with thermocouple;Integrated and adjustable Infrared (IR) eye protection.
8. The T-862++ also contains a temperature controlled soldering iron.
9. Factory provided video



Technical parameter



Working Voltage

AC220V/50Hz AC110V/60Hz

Output power

800W

Infra-red lamp body temperature adjustable

100℃-350℃

Preheating dish temperature adjustable

60℃-200℃


Components



Description

Quantity

T-862++ Chassis

1

PCB Board holder

1

936 Searing-iron

1

936 searing-iron rack

1

Lamp Body and Lens(D=28mm)

1

Lens(D=38mm)

1

Lens(D=48mm)

1

Eye protection(IR Filter)

1

Cell guide

1

Focus holder

1

Focus holder control knob

1

Fasten nut for focus holder

1

Steady ring

1

Fasten nut for steady ring

1

Power Cable (110VAC or 200VAC)

1

5mm Fuse, 10A 250VAC (Spare)

1

CD User Manual w/Video

1


Caution!


1. Do not cut the power off right after the work finished. You need to wait until the fan cools down the lamp body.

2. Keep the lamp body clean and the ventilation opening free of any obstructions.

3. The guide rod and the focusing support should be spread with lubricant regularly.

4. Pull out the power plug if you don’t use it for a long term.
5. Be careful of operating under high temperature conditions. Warranty statement

Reminder: These machines are very heavy, between 8 to 15 kilograms and are not designed to be shipped on airplanes, but in containers that do not move. We are not the shipping company,the airplane crew, the customs agent or the carrier in your country and therefore take no responsibility for damage caused in transit.


Corollary:


When our machines leave QC, they are tested, 100% new and in perfect condition. These

machines consist of modules. Should you receive a faulty or damaged module, we will be happy to replace it. However, we will not replace the complete machine; this is not covered by our warranty



Send Inquiry

If you have any enquiry about quotation or cooperation,please feel free to email us at wzyxchina@sina.com or use the following enquiry form. Our sales representative will contact you within 24 hours. Thank you for your interest in our products.

  • Subject:
  • *Name:
  • *E-mail:
  • Company Name:
  • Tel:
  • Fax:
  • Country:
  • Products:
  • Message:

Related Products

Copyright © 2017 Wenzhou Yingxing Technology Co.,Ltd All rights reserved. | Privacy Policy | Sitemaps | XML | Powered by: Otree